Technical characteristics :

The solid upper frame houses the vices and the hydraulic unit complete with motor and 11.00 kW variable displacement pump with heat exchanger.

The clamps are managed with a variable capacity pump with cylinders that allow a good reaction speed as the hydraulic system has been built with a dedicated line for opening and closing the jaws with three types of pressure, 40/80/150 and with the possibility for the operator to select the pressure and the harpoon position system automatically.

In and out of the harpoon, the position is managed and set by the operator, being retro-acted by a position transducer that allows the harpoon outfeed to be set at will. In the exclusion phase, the harpoon retracts completely into the clamp.

In the log machining phase, a harpoon retraction with gripped log is given the possibility of better log adhesion to the vises.

As always, we have an eye on accessibility in the event of maintenance needs; therefore the vices are provided with a carter for inspection and maintenance and both the harpoons and the log support plate against squares are removable and replaceable in the event of wear.

Hydraulic management is all in 24VDC low voltage.

We use an innovative system called IO-Link Field Bus that allows diagnostics of all sensors and actuators on the machine.



Technical configuration data:
 

• Frame length mm 6,900;
• N.4 clamps
• N.3 double-jointed turntables
• Track length quantified in 18 m;
• Complete with electric feed unit